Britain’s Health and Safety Executive found recommendations made in an asbestos removal plan were ignored by the contractor engaged to manage asbestos during demolition works. The asbestos spray coating on the main hall walls was chiseled off using power tools without any screens, enclosures or air extraction systems in place. Asbestos-containing material was bagged and carried to a skip outside. The contractor then notified the main contractors that the asbestos removal work on the main hall was finished, but when the project agents and main contractors visited the next day, they found the hall covered in dust and patches of asbestos material still on the wall.
The court heard that HSE found a catalogue of failings in the way the work had been planned and carried out. The exact location of asbestos material wasn’t identified and the work only took one day to complete rather than the planned seven. Risk assessments were too generic; enclosures, segregation and containment measures were inadequate; plans lacked detail; access and transit routes through the buildings weren’t clear; employees lacked specific instruction, and there was no reference to the original asbestos survey in the plan.
HSE experts concluded the company’s safeguards to control the asbestos risks were seriously inadequate leading to an unnecessary release and spread of dangerous asbestos fibres and dust.
The plan and risk assessment for the asbestos removal work in the building’s boiler room were also found to be confused and a decontamination unit was not powered. HSE served a prohibition notice to halt the work on the boiler room until the unit was properly powered and working.
Angus Group Ltd of Neilson Road, Paisley, Scotland, was found guilty of eight breaches of the Control of Asbestos Regulations 2006, and was fined a total of £109,000 and ordered to pay a further £42,100 in costs.
The HSE press release detailing the specific offences is here.